Powerful document shredder with automatic paper feeder and particle cut P-4

DAHLE ShredMATIC® 300
  • Oil- and maintenance-free operation
  • Convenient feeding and reversing function for manual control
  • Inspection window as optical waste level indicator
  • Overload indicator
  • Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
  • Automatic paper reverse function clears excess paper
  • Intelligent autofeed document shredder with automatic paper feeder for desk-side use
  • Automatic safety shut-off when the waste container is full or the door is open
  • Convenient swivel castors for greater mobility
  • Innovative MHP® cutting rollers (Matrix High-Performance): high-quality compound steel rollers for a guaranteed long service life
  • Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
  • Higher performance and greater convenience thanks to MHP cutting rollers
  • Device shuts down automatically after 30 minutes without use
  • Autofeed function shreds up to 300 sheets (80 gsm) in a single load, with lockable paper feeder
  • Manual paper feeder, 12-14 sheets of paper (80 gsm)
  • Powerful motor ensures high performance and longer run times
  • Dimensions (H x W x D): 642 x 432 x 355 mm
Find your contact

Product details

  • Entry width 220 mm Entry width 220 mm
  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Convenient swivel castors, 2 of which with lockable brakes for secure positioning Convenient swivel castors, 2 of which with lockable brakes for secure positioning
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Can be locked to prevent unauthorised use Can be locked to prevent unauthorised use
  • Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required
  • The ‘autofeed’ function ensures automatic feed of complete stacks of paper (80 gsm) The ‘autofeed’ function ensures automatic feed of complete stacks of paper (80 gsm)
  • DAHLE MHP Technology® document shredders DAHLE MHP Technology® document shredders
  • 35-year guarantee on the cutters 35-year guarantee on the cutters

Technical data

Product nameDAHLE ShredMATIC® 300
Article number35314-15092
Entry width in mm220 mm
Sheet capacity (80g/sqm)*14 - 300 sheets
Particle size (in mm)4 x 15 mm
Security levelsP-4/F-1/O-3/T-4/E-3
Run time480min
Autofeed run time480min
CDs/DVDsYes
CardsYes
Paper clipsYes
Waste collection volume (in l)40 l
Noise level when idle (db)60 dB(A)
Power consumption650 W
Power supply230 V
Weight net18.5 kg
Speed (m/min)2.5 m/min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Videos