Powerful document shredder with automatic paper feeder and particle cut P-4

DAHLE ShredMATIC® 90
  • Oil- and maintenance-free operation
  • Convenient feeding and reversing function for manual control
  • Extra-small particles allow for less frequent emptying
  • Overload indicator
  • Overheating protection with optical indicator
  • Intelligent document shredder for desk-side use
  • Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
  • Automatic paper reverse function clears excess paper
  • Two inspection flaps for easy cleaning of automatic paper feeder
  • Convenient casters for greater mobility
  • Automatic safety shut-off when the waste container is full or the door is open
  • Autofeed function shreds up to 90 sheets (80 gsm) in a single load
  • Manual feed of up to 10 sheets possible
  • Pull-out waste container
  • Dimensions (H x W x D): 506 x 367 x 263 mm
  • Optical waste level indicator
Find your contact

Product details

  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Convenient swivel castors, 2 of which with lockable brakes for secure positioning Convenient swivel castors, 2 of which with lockable brakes for secure positioning
  • Entry width 222 mm Entry width 222 mm
  • Waste collection volume 23 litres Waste collection volume 23 litres
  • Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required
  • The ‘autofeed’ function ensures automatic feed of complete stacks of paper (80 gsm) The ‘autofeed’ function ensures automatic feed of complete stacks of paper (80 gsm)

Technical data

Product nameDAHLE ShredMATIC® 90
Article number35090-16180
Entry width in mm222 mm
Sheet capacity (80g/sqm)*1 - 90 sheets
Particle size (in mm)4 x 12 mm
Security levelsP-4/F-1/T-4/E-3
Run time60min
Autofeed run time60min
CardsYes
Paper clipsYes
Waste collection volume (in l)23 l
Noise level when idle (db)62 dB(A)
Power consumption240 W
Power supply230 V
Weight net9 kg
Speed (m/min)1.8 m/min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.