Professional document shredder with manual paper feeder and P4 particle cut

DAHLE 404air
  • Oil- and maintenance-free operation
  • Convenient feeding and reversing function for manual control
  • Automatic paper reverse function clears excess paper
  • Automatic safety shut-off when the waste container is full or the door is open
  • Pull-out waste container
  • Innovative MHP® cutting rollers (Matrix High-Performance): high-quality compound steel rollers for a guaranteed long service life
  • Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
  • Higher performance and greater convenience thanks to MHP cutting rollers
  • Device shuts down automatically after 30 minutes without use
  • Powerful motor ensures high performance and longer run times
  • Doors open wide for easy emptying of waste container
  • Intuitive, user-friendly illuminated control panel with audio signals
  • Electronic start and stop function controlled by integrated light barrier
  • Optical waste level indicator
  • Convenient swivel castors, two of which are lockable, with 5 cm ground clearance for greater mobility
  • Practical cold-device plug can be detached from document shredder
  • Dimensions (H x W x D): 705 x 430 x 350 mm
  • Improves indoor climate even when the document shredder is used heavily. The unique DAHLE CleanTEC® filter system demonstrably reduces fine dust levels produced by document shredding.
  • Convenient deskside document shredder
  • Extremely quiet operation
  • Easy-to-reach main switch on rear of device
Contacts

Product details

  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Entry width 240 mm Entry width 240 mm
  • Convenient swivel castors with lockable brakes for secure positioning Convenient swivel castors with lockable brakes for secure positioning
  • German Engineering by Dahle German Engineering by Dahle
  • Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required
  • DAHLE MHP Technology® document shredders DAHLE MHP Technology® document shredders
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment
  • Unique DAHLE CleanTEC® filter system Unique DAHLE CleanTEC® filter system

Technical data

Product nameDAHLE 404air
Weight net25.5 kg
Entry width240 mm
Sheet capacity (80g/sqm)*7 - 9 sheets
Particle size (in mm)4 x 40 mm
Security levelsP-4/F-1/T-4/E-3
CardsYes
Waste collection volume (in l)40 l
Noise level when idle (db)46 dB(A)
Power consumption350 W
Power supply230 V
Speed (m/min)6.5 m/min
Paper clipsYes
Run time10min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.