Professional document shredder with manual paper feeder and P5 particle cut

DAHLE 504
  • Extremely quiet operation
  • Easy-to-reach main switch on rear of device
  • Convenient feeding and reversing function for manual control
  • Automatic paper reverse function clears excess paper
show more
Find your contact

Product details

  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Entry width 240 mm Entry width 240 mm
  • Convenient swivel castors with lockable brakes for secure positioning Convenient swivel castors with lockable brakes for secure positioning
  • German Engineering by Dahle German Engineering by Dahle
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment

Technical data

Product nameDAHLE 504
Article number40222-04701
Entry width in mm240 mm
Sheet capacity (80g/sqm)*5 sheets
Particle size (in mm)2 x 15 mm
Security levelsP-5/F-2/T-5/E-4
Oil incl. in ml50 ml
Run time10min
CardsYes
Paper clipsYes
Waste collection volume (in l)40 l
Noise level when idle (db)47 dB(A)
Power consumption350 W
Weight net25 kg
Speed (m/min)6 m/min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.