1. Home
  2. Shredders
  3. DAHLE 516
DAHLE 516
DAHLE 516

Professional document shredder with manual paper feeder and P5 particle cut

DAHLE 516
  • Convenient feeding and reversing function for manual control
  • Convenient automatic reverse function to clear excess paper from paper feeder
  • Motor automatically shuts down when the waste container is full or the door is open
  • Separate CD feed opening and waste container for secure, environmentally-friendly shredding
  • Innovative MHP® cutting rollers (Matrix High-Performance): high-quality compound steel rollers for a guaranteed long service life
  • Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
  • Device shuts down automatically after 30 minutes without use
  • Powerful motor ensures high performance and longer run times
  • Doors open wide for easy emptying of waste container
  • User-friendly, clearly designed control panel with illuminated information and function unit and acoustic signals
  • Electronic start and stop function controlled by integrated light barrier
  • Stops cutting automatically and displays signal on the control panel when the waste container is full
  • Extremely quiet for a pleasant, low-noise working environment
  • Convenient swivel castors with 5 cm ground clearance for greater mobility, two lockable brakes for secure positioning
  • Separate main switch to switch off document shredder completely
  • Practical cold-device plug can be detached from document shredder
  • Includes 10 robust re-usable waste bags (item no. 20707)
  • Dimensions (H x W x D): 960 x 734 x 511 mm
  • High-volume department document shredder
  • Higher performance thanks to MHP cutting rollers
  1. Product details
  2. Technical data
  3. Downloads

Product details

  • Cross cut Cross cut
  • Convenient swivel castors with lockable brakes for secure positioning Convenient swivel castors with lockable brakes for secure positioning
  • High-volume document shredders:maximum performance to meet high expectations. High-volume document shredders:maximum performance to meet high expectations.
  • Entry width 400 mm Entry width 400 mm
  • Waste collection volume 160 litres Waste collection volume 160 litres
  • German Engineering by Dahle German Engineering by Dahle
  • DAHLE MHP Technology® document shredders DAHLE MHP Technology® document shredders
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment

Technical data

Product name516
Weight net75 kg
Entry width400 mm
Shreds A4 80 gsm paper*13 - 15 sheets
Particle size in mm2 x 15 mm
Security levelsP-5/F-2/O-4/T-5/E-4
CardsYes
Waste collection volume160 l
dB (A) when idle53 dB(A)
Power consumption900 W
Power supply230 V
Speed5.6 m/min
Paper clipsYes
CDs/DVDsYes
Oil incl. in ml50 ml
Run time20min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Downloads