Professional document shredder with manual paper feeder and P5 particle cut
Find your contactProduct details
-
Cross cut -
German Engineering by Dahle -
35-year guarantee on the cutters
Technical data
| Product name | DAHLE 519 |
| Article number | 20392-20844 |
| Entry width in mm | 390 mm |
| Sheet capacity (80g/sqm)* | 23 sheets |
| Particle size (in mm) | 2 x 15 mm |
| Security levels | P-5/F-2/O-4/T-5/E-4 |
| Oil incl. in ml | 250 ml |
| Run time | Continuous operation |
| CDs/DVDs | yes |
| Cards | yes |
| Paper clips | yes |
| Waste collection volume (in l) | 190 l |
| Noise level when idle (db) | 60 dB(A) |
| Power consumption | 1900 W |
| Weight net | 153 kg |
| Speed (m/min) | 4 m/min |
| Dimensions H x W x D (mm) | 1.190 x 700 x 620 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.