Professional document shredder with manual paper feeder and P6 micro cut

DAHLE 604
  • Convenient feed and reverse function for manual control
  • Convenient automatic reversing function clears feed opening after feeding in too much paper
  • Motor cuts out automatically when waste bag is full or door is open
  • With automatic motor cut-out after 30 minutes without use
  • Powerful motor for high capacity and longer running times
  • Widely opening doors for ease of emptying the waste bag
  • Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
  • Electronic start-stop function controlled by integrated light barrier
  • Automatic shredding stop and optical signal in control panel when bin full
  • High-quality, solid-steel cutters in special steel for a guaranteed long service life
  • Extremely quiet operation for a particularly pleasant working atmosphere
  • Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
  • Separate main switch for completely shutting down the document shredder
  • Practical IEC power connector can be unplugged from the document shredder
  • Dimensions (H x W x D): 705 x 430 x 350 mm
  • Convenient deskside document shredder
  • 5-year guarantee on the cutters of models providing P-6 and P-7 security
  • Integrated oil tank for automatically oiling the cutters in model 40231

Product details

  • Deskside document shredders: performance and convenience directly at the desk Deskside document shredders: performance and convenience directly at the desk
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Entry width 240 mm Entry width 240 mm
  • Convenient swivel casters with brake for reliably keeping the document shredder firmly in place Convenient swivel casters with brake for reliably keeping the document shredder firmly in place
  • German Engineering by Dahle German Engineering by Dahle
  • With automatic motor cut-out after 30 minutes without use With automatic motor cut-out after 30 minutes without use
  • Extremely quiet operation for a particularly pleasant working atmosphere Extremely quiet operation for a particularly pleasant working atmosphere
  • Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant

Technical data

Product name604
Weight net25 kg
Entry width240 mm
Shreds A4 80 gsm paper*2 sheets
Particle size in mm0,8 x 12 mm
Security levelsP-6/F-3
dB (A) when idle50 dB(A)
Speed6 m/min
Oil incl. in ml400 ml
Autom. oilerYes
*LAUFZEIT_SEL_AV_DAH10min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.