Professional document shredder with manual paper feeder and P2 strip cut
Product details
-
Entry width 220 mm -
Strip cut -
Deskside document shredders:performance and convenience directly at the desk -
Convenient swivel castors with lockable brakes for secure positioning -
Waste collection volume 30 litres -
German Engineering by Dahle -
35-year guarantee on the cutters -
Device shuts down automatically after 30 minutes without use -
Extremely quiet for a pleasant, low-noise working environment
Technical data
| Product name | 203 |
| Product name | DAHLE 203 |
| Weight net | 22.5 kg |
| Entry width | 220 mm |
| Sheet capacity (80g/sqm)* | 13 sheets |
| Particle size (in mm) | 3,9 mm |
| Security levels | P-2/T-2/E-2 |
| Cards | Yes |
| Waste collection volume (in l) | 30 l |
| Noise level when idle (db) | 49 dB(A) |
| Power consumption | 350 W |
| Speed (m/min) | 6 m/min |
| Paper clips | Yes |
| Run time | 10min |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.