Professional document shredder with manual paper feeder and P2 strip cut
Product details
-
Strip cut -
Deskside document shredders:performance and convenience directly at the desk -
German Engineering by Dahle -
35-year guarantee on the cutters -
Device shuts down automatically after 30 minutes without use -
Extremely quiet for a pleasant, low-noise working environment -
Unique DAHLE CleanTEC® filter system
Technical data
| Run time | 10min |
| Product name | 204air |
| Weight net | 26 kg |
| Entry width in mm | 240 mm |
| Sheet capacity (80g/sqm)* | 14 sheets |
| Particle size (in mm) | 3,9 mm |
| Security levels | P-2/T-2/E-2 |
| Cards | yes |
| Waste collection volume (in l) | 40 l |
| Noise level when idle (db) | 46 dB(A) |
| Power consumption | 350 W |
| Speed (m/min) | 6 m/min |
| Paper clips | yes |
| Dimensions H x W x D (mm) | 705 x 430 x 350 |
| Product name | DAHLE 204air |
| Article number | 41204-04705 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.