1. Home
  2. Shredders
  3. DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air
DAHLE 404air

Professional document shredder with manual paper feeder and P4 particle cut

DAHLE 404air
  • Oil- and maintenance-free operation
  • Convenient feeding and reversing function for manual control
  • Automatic paper reverse function clears excess paper
  • Automatic safety shut-off when the waste container is full or the door is open
  • Pull-out waste container
  • Innovative MHP® cutting rollers (Matrix High-Performance): high-quality compound steel rollers for a guaranteed long service life
  • Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
  • Higher performance and greater convenience thanks to MHP cutting rollers
  • Device shuts down automatically after 30 minutes without use
  • Powerful motor ensures high performance and longer run times
  • Doors open wide for easy emptying of waste container
  • Intuitive, user-friendly illuminated control panel with audio signals
  • Electronic start and stop function controlled by integrated light barrier
  • Optical waste level indicator
  • Convenient swivel castors, two of which are lockable, with 5 cm ground clearance for greater mobility
  • Practical cold-device plug can be detached from document shredder
  • Dimensions (H x W x D): 705 x 430 x 350 mm
  • Improves indoor climate even when the document shredder is used heavily. The unique DAHLE CleanTEC® filter system demonstrably reduces fine dust levels produced by document shredding.
  • Convenient deskside document shredder
  • Extremely quiet operation
  • Easy-to-reach main switch on rear of device
  1. Product details
  2. Technical data
  3. Downloads

Product details

  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Entry width 240 mm Entry width 240 mm
  • Convenient swivel castors with lockable brakes for secure positioning Convenient swivel castors with lockable brakes for secure positioning
  • German Engineering by Dahle German Engineering by Dahle
  • Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required
  • DAHLE MHP Technology® document shredders DAHLE MHP Technology® document shredders
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment
  • Unique DAHLE CleanTEC® filter system Unique DAHLE CleanTEC® filter system

Technical data

Product name404air
Product nameDAHLE 404air
Weight net25.5 kg
Entry width240 mm
Sheet capacity (80g/sqm)*7 - 9 sheets
Particle size (in mm)4 x 40 mm
Security levelsP-4/F-1/T-4/E-3
CardsYes
Waste collection volume (in l)40 l
Noise level when idle (db)46 dB(A)
Power consumption350 W
Power supply230 V
Speed (m/min)6.5 m/min
Paper clipsYes
Run time10min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Downloads