Professional document shredder with manual paper feeder and P4 particle cut
Product details
-
Cross cut -
High-volume document shredders:maximum performance to meet high expectations. -
German Engineering by Dahle -
Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required -
35-year guarantee on the cutters -
Device shuts down automatically after 30 minutes without use -
Extremely quiet for a pleasant, low-noise working environment
Technical data
| Product name | DAHLE 414 |
| Run time | 20min |
| Dimensions H x W x D (mm) | 890 x 734 x 511 |
| Product name | 414 |
| Weight net | 64 kg |
| Entry width in mm | 310 |
| Sheet capacity (80g/sqm)* | 24 - 26 sheets |
| Particle size (in mm) | 4 x 40 mm |
| Security levels | P-4/F-1/O-3/T-4/E-3 |
| Cards | yes |
| Waste collection volume (in l) | 140 l |
| Noise level when idle (db) | 52 dB(A) |
| Power consumption | 900 W |
| Power supply | 230 V |
| Speed (m/min) | 4.7 |
| Paper clips | yes |
| CDs/DVDs | yes |
| Article number | 50514-12706 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.