Professional document shredder with manual paper feeder and P4 particle cut
Technical data
| Product name | DAHLE 416air |
| Run time | 20min |
| Product name | 416air |
| Weight net | 69 kg |
| Entry width in mm | 400 mm |
| Sheet capacity (80g/sqm)* | 18 - 20 sheets |
| Particle size (in mm) | 4 x 40 mm |
| Security levels | P-4/F-1/O-3/T-4/E-3 |
| Cards | yes |
| Waste collection volume (in l) | 160 l |
| Noise level when idle (db) | 52 dB(A) |
| Power consumption | 900 W |
| Power supply | 230 V |
| Speed (m/min) | 5.7 m/min |
| Paper clips | yes |
| CDs/DVDs | yes |
| Article number | 51564-13903 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.