Professional document shredder with manual paper feeder and P5 particle cut

DAHLE 504air
  • Convenient feeding and reversing function for manual control
  • Intelligent document shredder for desk-side use
  • Convenient automatic reverse function to clear excess paper from paper feeder
  • Motor automatically shuts down when the waste container is full or the door is open
  • Device shuts down automatically after 30 minutes without use
  • Powerful motor ensures high performance and longer run times
  • Doors open wide for easy emptying of waste container
  • User-friendly, clearly designed control panel with illuminated information and function unit and acoustic signals
  • Electronic start and stop function controlled by integrated light barrier
  • Stops cutting automatically and displays signal on the control panel when the waste container is full
  • High-quality solid steel cutting rollers made of special steel for guaranteed long lifetime
  • Includes 10 robust re-usable waste bags (item no. 20706)
  • Extremely quiet for a pleasant, low-noise working environment
  • Convenient swivel castors with 5 cm ground clearance for greater mobility, two lockable brakes for secure positioning
  • Separate main switch to switch off document shredder completely
  • Practical cold-device plug can be detached from document shredder
  • Dimensions (H x W x D): 705 x 430 x 350 mm
  • Unique DAHLE CleanTEC® filter system reduces fine dust levels from document shredder, improving indoor climate

Product details

  • Deskside document shredders:performance and convenience directly at the desk Deskside document shredders:performance and convenience directly at the desk
  • Cross cut Cross cut
  • Waste collection volume 40 litres Waste collection volume 40 litres
  • Entry width 240 mm Entry width 240 mm
  • Convenient swivel castors with lockable brakes for secure positioning Convenient swivel castors with lockable brakes for secure positioning
  • German Engineering by Dahle German Engineering by Dahle
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment
  • Unique DAHLE CleanTEC® filter system Unique DAHLE CleanTEC® filter system
  • Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant

Technical data

Product name504air
Weight net26 kg
Entry width240 mm
Shreds A4 80 gsm paper*5 sheets
Shred width in mm2 x 15 mm
Security levelsP-5/F-2/T-5/E-4
CardsYes
Waste collection volume40 l
dB (A) when idle47 dB(A)
Speed6 m/min
Paper clipsYes
Oil incl. in ml400 ml
Autom. oilerYes
Run time10min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.