Professional document shredder with manual paper feeder and P5 particle cut
Technical data
| Article number | 51322-13847 |
| Product name | 506air |
| Product name | DAHLE 506air |
| Entry width in mm | 260 mm |
| Sheet capacity (80g/sqm)* | 11 - 13 sheets |
| Particle size (in mm) | 2 x 15 mm |
| Security levels | P-5/F-2/T-5/E-4 |
| Autom. oiler | Yes |
| Oil incl. in ml | 400 ml |
| Run time | 10min |
| Cards | Yes |
| Paper clips | Yes |
| Waste collection volume (in l) | 60 l |
| Noise level when idle (db) | 46 dB(A) |
| Power consumption | 650 W |
| Power supply | 230 V |
| Weight net | 45 kg |
| Speed (m/min) | 4.4 m/min |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.