Article number | 50422-13827 |
Product name | 510 |
Product name | DAHLE 510 |
Entry width in mm | 260 |
Sheet capacity (80g/sqm)* | 11 - 13 sheets |
Particle size (in mm) | 2 x 15 mm |
Security levels | P-5/F-2/T-5/E-4 |
Oil incl. in ml | 50 ml |
Run time | 10min |
Cards | yes |
Paper clips | yes |
Waste collection volume (in l) | 100 l |
Noise level when idle (db) | 53 dB(A) |
Power consumption | 650 W |
Power supply | 230 V |
Weight net | 46 kg |
Speed (m/min) | 4.4 |
Dimensions H x W x D (mm) | 944 x 545 x 435 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.