Professional document shredder with manual paper feeder and P5 particle cut

DAHLE 510air L plus
  • Convenient feeding and reversing function for manual control
  • Automatic paper reverse function clears excess paper
  • Automatic safety shut-off when the waste container is full or the door is open
  • Pull-out waste container
show more

Product details

  • Cross cut Cross cut
  • Departmental document shredders: professional performance across the team. Departmental document shredders: professional performance across the team.
  • German Engineering by Dahle German Engineering by Dahle
  • 35-year guarantee on the cutters 35-year guarantee on the cutters
  • Device shuts down automatically after 30 minutes without use Device shuts down automatically after 30 minutes without use
  • Extremely quiet for a pleasant, low-noise working environment Extremely quiet for a pleasant, low-noise working environment
  • Unique DAHLE CleanTEC® filter system Unique DAHLE CleanTEC® filter system
  • Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant

Technical data

Product nameDAHLE 510air L plus
Product name510air L plus
Weight net60 kg
Entry width in mm310
Sheet capacity (80g/sqm)*17 - 19 sheets
Particle size (in mm)2 x 15 mm
Security levelsP-5/F-2/O-4/T-5/E-4
Cardsyes
Waste collection volume (in l)100 l
Noise level when idle (db)53 dB(A)
Power consumption900 W
Power supply230 V
Speed (m/min)4.8
Paper clipsyes
CDs/DVDsyes
Oil incl. in ml400 ml
Autom. oileryes
Run time20min
Dimensions H x W x D (mm)944 x 545 x 435
Article number51472-13878

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.