Professional document shredder with manual paper feeder and P6 micro cut
Technical data
| Waste collection volume (in l) | 140 l |
| Product name | 614 |
| Weight net | 64 kg |
| Entry width in mm | 310 mm |
| Sheet capacity (80g/sqm)* | 9 sheets |
| Particle size (in mm) | 0,8 x 12 mm |
| Security levels | P-6/F-3/T-6 |
| Cards | Yes |
| Noise level when idle (db) | 50 dB(A) |
| Speed (m/min) | 4.5 m/min |
| Oil incl. in ml | 400 ml |
| Autom. oiler | Yes |
| Product name | DAHLE 614 |
| Run time | 20min |
| Article number | 40530-04838 |
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.