1. Home
  2. Shredders
  3. DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716
DAHLE 716

Professional document shredder with manual paper feeder and P7 micro cut

DAHLE 716
  • Convenient feed and reverse function for manual control
  • Convenient automatic reversing function clears feed opening after feeding in too much paper
  • Motor cuts out automatically when waste bag is full or door is open
  • With automatic motor cut-out after 30 minutes without use
  • Powerful motor for high capacity and longer running times
  • Widely opening doors for ease of emptying the waste bag
  • Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
  • Electronic start-stop function controlled by integrated light barrier
  • Cutting operation stops automatically with visual signal on the control panel when the waste container is full
  • High-quality, solid-steel cutters in special steel for a guaranteed long service life
  • Extremely quiet operation for a particularly pleasant working atmosphere
  • Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
  • Separate main switch for completely shutting down the document shredder
  • Practical IEC power connector can be unplugged from the document shredder
  • Includes 10 strong waste bags suitable for re-use (Item no. 20708)
  • Dimensions (H x W x D): 960 x 734 x 511 mm
  • High volume department document shredder
  • 5-year guarantee on the cutters of models providing P-6 and P-7 security
  • Integrated oil tank for automatically oiling the cutters in all models providing P-6 and P-7 security
  1. Product details
  2. Technical data
  3. Downloads

Product details

  • Convenient swivel casters with brake for reliably keeping the document shredder firmly in place Convenient swivel casters with brake for reliably keeping the document shredder firmly in place
  • High-volume document shredders: maximum performance to meet high expectations. High-volume document shredders: maximum performance to meet high expectations.
  • Entry width 400 mm Entry width 400 mm
  • Waste collection volume 160 litres Waste collection volume 160 litres
  • German Engineering by Dahle German Engineering by Dahle
  • With automatic motor cut-out after 30 minutes without use With automatic motor cut-out after 30 minutes without use
  • Extremely quiet operation for a particularly pleasant working atmosphere Extremely quiet operation for a particularly pleasant working atmosphere
  • Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant Integrated oil tank for controlled, automatic lubrication of the cross-cut cutters helps to lengthen service life while keeping performance constant

Technical data

Product name716
Weight net92 kg
Entry width400 mm
Shreds A4 80 gsm paper*9 sheets
Shred width in mm1 x 4,7 mm
Security levelsP-7/F-3/T-6
CardsYes
dB (A) when idle52 dB(A)
Speed8 m/min
Oil incl. in ml400 ml
Autom. oilerYes
*LAUFZEIT_SEL_AV_DAH

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Downloads